ABC Article Directory banner displaying blue butterfly logo. Click to go directly to the main Homepage


Airbrush Painting an Airplane Pin-Up Girl on Metal






     Recently we were hired, commissioned to airbrush paint pin up girl, airplane nose art piece on metal. The piece was a simulated because we curved the metal piece to simulate a curved side of an airplane.
The client wanted a special painting for her husband, he had specifically wanted Pin Up girl, nose art like the ones seen in the old WWII war planes. His input was that it be a camouflage paint job with the pin-up juxtaposed the rivets and camo job. Plus he wanted a notches on it showing enemy planes shot down. The piece was titled "Ecstatic Essie", the clients name.

We started with a 24" x 36" aluminum panel. The panel already had already been primed with a white base color. We wet sanded the panel to accept the paint. We started with painting the camouflage paint job base. We then proceeded to put in the simulated panels. We contoured the panel line to make them look as if they were curved to give the painting the feel of the actual planes curvature.

Next we worked on the rivets that hold the panels (in real life). They were a little tricky…our approach was to paint a larger, dark circle almost black…this would simulate indentations where the rivets are set. We then did a white spot on in the middle of the simulated indentations, these indicated the rivet heads. Next we did a half round white area at the bottom of the dark circle to simulate the lower part of the rivets' indentation bouncing light. All this served to give the rivets depth and make them look semi real.

The above was considered the background. After that was all done we prepared to paint the red headed pin up. We started that with covering the painted back ground with application tape so that we could lay out/sketch the girl and start painting her without over spraying the background. The layout is done with pencil - then we cut out the frisket for the body. We start airbrush painting the girl by laying down the flesh tone for her body. Once that is done and I am satisfied with the flesh color tone I start putting in her features. The features are put in with a small brush before I start the airbrushing. The back ground I mentioned before was done using acrylic paints. For the detail I switch over to urethane paints (yes they are compatible)…using red, yellow and blue urethanes I have already mixed a color I will use for shadowing. I never use black for shadowing. I use urethane paints for the detail because they spray finer that acrylics, but the acrylics cover faster for the backgrounds. I find the urethane paints are the ultimate paints for airbrush use.

After I have the body painted with the proper flesh tone I cut out another frisket for the bathing suit which I want to make real shear. After I paint the suit on her I come in with some shadowing to make it as if though you can see her body through the shear bathing suit which gives it the desirable, sexy pin-up appeal.

As a freelance, artist we have worked in a variety of mediums. We have have been creating and painting for over twenty years. Airbrush is our specialty, but we get commissioned to create custom art in a variety of mediums including acrylic painting, portraits and art.

You can see the finished pin-up piece at the following link: http://www.airbrushmagic.net/Airbplane%20Nose%20Art%20on%20metal.htm

Ray Gatica is an airbrush artist. He gets commissioned to paint various airbrush art for clients.You can see the finished piece at http://www.airbrushmagic.net. We work out of Houston Texas, and can be reached at 281-441-9714. We can be emailed at Ray@Airbrushmagic.net

Ray Gatica is an airbrush artist. He gets commissioned to paint various airbrush art for clients.You can see the finished piece at http://www.airbrushmagic.net. We work out of Houston Texas, and can be reached at 281-441-9714. We can be emailed at Ray@Airbrushmagic.net






Article Source: http://www.abcarticledirectory.com

Ray Gatica is an airbrush artist. He gets commissioned to paint various airbrush art for clients.You can see the finished piece at www.airbrushmagic.net. We work out of Houston Texas, and can be reached at 281-441-9714. We can be emailed at Ray@Airbrushmagic.net


Posted on 2012-10-29, By: *

* Click on the author's name to view their profile and articles!!!


Note: The content of this article solely conveys the opinion of its author.


Animated RSS Symbol for the ABC Article Directory rss category feed ... Get Every New Hobbies Article Delivered Instantly!



Facebook Comments


" data-width="470" data-num-posts="10">




Cartoon image of a figure holding a magnifying glass looking for articles in the ABC Article Directory

Still Searching? Last Chance to find what you're looking for with a Google Custom Search!



Custom Search

Or.... You can search this site using our Bing Custom Search!

Bing




Did You Like/Dislike This Article? Give It YOUR Rating!

Please Rate this Article

No Ratings Yet. Be The First To Rate This Article





/EDF Publishing. All rights reserved. Script Services by: Sustainable Website Design
Use of our free service is protected by our Privacy Policy and Terms of Service Contact Us

User published content is licensed under a Creative Commons Attribution-No Derivative Works 3.0 Unported License
.
Increase your website traffic with Attracta.com

Valid CSS!


ABOUT SSL CERTIFICATES
Date:


Powered by ABC Article Directory